Products Introduction
SINOSAB HDPE injection molding grade has good balance of rigidity and toughness, good impact resistance and excellent of low temperatures resistance and good environmental stress crack resistanse. The resin has good rigidity and abrasion resistance, and good processability.
Products Specification
Grades |
| 2200J | 1500J | 1600J | 3000JE | 5306J |
MFR | g/10min | 5.5 | 20 | 18 | 2.2 | 6 |
Density | g/cm3 | 0.964 | 0.958 | 0.956 | 0.957 | 0.953 |
Ash | %≤ | 0.03 | — | 0.03 | — | — |
Tensile Strength | MPa≥ | 23 | 28 | 25 | 24 | 22 |
Elongation at break | %≥ | 180 | 40 | 40 | 600 | 200 |
Flexural Modulus | MPa≥ | — | — | — | 1000 | — |
Application
SINOSAB HDPE injection-molding grade is used for making reusable containers, such as beer cases, beverage cases, food cases,vegetable cases and egg cases and can also be used for making plastic trays, goods containers, home appliances, daily goods use and thin-wall food containers. It can also be used in the production of industrial-use barrels, garbage bins and toys. Through the extrusion and compression molding process and injection molding, it can be used to produce the caps of purified water, mineral water, tea beverage and juice beverage bottles.
