Products Introduction
SINOSAB LDPE Injection-molding grade can be used in the production of polyethylene foaming material, powdered coating and injection-molded products. The resin has a molecular structure with branching. It has high melt strength, good mechanical behavior, heat endurance and chemical corrosion resistance and excellent processability. Products made from this resin have many advantages such as short shaping cycle, small shrinkage rate and stable dimensions.
Products Specification
Grades |
| 1I2A-1 | LD400 | LD605 | LD607 | 2410T |
MFR | g/10min | 2 | 25 | 6 | 7.5 | 36 |
Density | g/cm3 | 0.92 | 0.921 | 0.922 | 0.921 | 0.924 |
Tensile Strength | MPa≥ | 13 | 18 | 8 | 9 |
|
Elongation at break | %≥ | 500 |
| 100 | 400 |
|
Application
SINOSAB LDPE Injection-molding grade is principally used for producing civil detonators, pipes, plates, fruit net bags, traffic guardrails, smallsized injection-molding products (the inner part of a bottle cup) and powdered coating.
